DAITO SPLIT DRILL SAW LINE

Split Drill and Saw system with automatic buffer and cross transports working together for increased production.

DAITO CUD3C CNC DRILL
Carbide Ultimate Drill

There is no better drilling machine.
Take a look inside and see for yourself.

* 3 x Independent drilling spindles
* Automatic tool changing
* New type high-speed layout marking
* Multiple flange and web supports
* Heavy-duty vices
* Fully CNC controlled

DAITO GTR BAND SAW

Simply the Fastest and Most Reilable structural saw on the market.

* Double Mitre Left and Right
* Digital Control
* Linear Guides
* Blade Pinching Escape
* Dual Coolant (Fluid & Mist)

VIDEO

D.A.S.P.


DAITO AUTOMATIC STEEL PROCESSING

Daito's DASP is a full automation system that works in real-life steel processing scenarios. With over 300 systems installed worldwide, Daito is renowned as the largest supplier of this advanced technology.

ADVANCED FEATURES

Extremely well thought-out features designed to benefit the end-user experience
and not just to satisfy a spreadsheet!

LAYOUT MARKING AUTOMATION
FAST, CLEAN AND COST-EFFICIENT

In addition to high-performance carbide drilling, the CUD3C1050 performs clean, fast and precise weld layout markings as illustrated below.
‘PRE-WELDING’

Together with the optional under-web marking unit, it’s possible to mark welding lines and letters on all 4 sides of the workpiece.

This automation saves time and money all the while dramatically reducing human errors.

INDEPENDENT TRAVELING DRILL HEADS
COMPLETE WITH 3 AUTOMATIC TOOL CHANGERS

Each of the three (3) drilling spindles (Top / Left / Right) can independently move in all directions along the workpiece.

This ensures the hole pitch and accuracy are always precise.

Plus speed and efficiency are at there maximum output.

DRILL FEATURES

3 DRILL SPINDLES

CUD3C is equipped with 3 spindles. Each spindle is capable of high-speed carbide drilling, milling, tapping, countersinking and new high-speed layout marking.

INDEPENDENT TRAVELING DRILLS

Each of the 3 drill heads travel independently in all directions allowing all holes within range to be drilled without continually re-indexing and re-clamping the workpiece. This means much higher accuracy and higher productivity.

4 SIDE LAYOUT MARKING

New high-speed layout marking is 8 to 10 times faster than traditional scribe marking. The workpiece is stationary for maximum reliability and accuracy.

AUTOMATIC TOOL CHANGING

Three (3) Independent tool changers for each of the drill heads. This allows for a variety of uninterrupted drilling / marking operations with different tools.

PINCH ROLLER SYSTEM

The workpiece is fed by powerful pinch rollers located on the in-feed / out-feed sides of the machine. Even the heaviest workpiece is fed efficiently and accurately.

DUAL MEASURING DISKS

For precise measurements, twin disks work together. If the measurements of each disk vary, an alarm will be issued to stop the machine.

FLANGE HEIGHT GAUGES & SUPPORTS

The Flange height gauges not only support flanges, but also measure flange distortion that might remain after being vertically clamped.

WEB SUPPORTS

Web supports prevent thinner webs from bending under the pressure of drilling. This feature reduces drill bit failure and improves hole quality.

POSITIONING COMPENSATION

The workpiece positioning error caused by inertia is compensated by the positioning of each drill.

4 VERTICAL CLAMP ROLLERS

During the material feed, four vertical rollers clamp evenly to assist distorted material is firmly held down. Angles and flat bars are also able to be clamped as well as H beams.

PENDANT OPERATION PANEL

The pendant mounted operation panel can be easily swung to either side of the machine for easy setup and operation.

CNC CONTROL

Anybody can operate our user friendly CNC controlled machines. The intelligent CNC takes all the worries and hard work out of programming.

DRILL OPTIONS

CHIP SWEEPER

After drilling, the chip sweeper cleans out built-up drill chips from the beam. Making sure no damage to the saw blade edge. Also ensures a clean and safe work environment with no chips spread throughout the workshop.

CHIP CONVEYOR

Drill chips built up inside the machine are automatically removed by the chip conveyor.

LASER MARKER

Irregular or manual positioning of the workpiece is made easy using the laser beam.

UNDER-WEB MARKING

For the welding layout marking, either scratching or scribing is available. (Sample photo is scratching)

WEB HEIGHT GAUGES

Two web height gauges check actual web height to allow automatic compensation for possible irregularities. (Optional)

MATERIAL LOADING & UNLOADING

Daito lift and carry cart system for loading and unloading to material stockyards. Gain increased productivity without having to rely on overhead cranes or forklifts.

COMPLETE AUTOMATION
AUTOMATIC PARTS REMOVER

The most advanced and functional way to remove short pieces from the line after cutting.

1. Automatically Remove Trim Cuts
2. Automatically Remove Short Parts
3. Automatically Remove Remnants (no matter size or shape)

The dual vice and pincher arm can handle all shapes and sizes. No slipping on magnets, no parts to heavy to handle, no more excuses.

BAND SAW FEATURES

DOUBLE MITRE CUTTING

Miter cut left and right. The machine fully controlled by the CNC and will automatically rotate to the correct angle.

DIGITALLY OPTIMISED SAW CUTTING

Both the blade speed and feed rate are in database and will automatically adjust itself according to the profile. The servo feed control allows for the most effective cutting condition with the machine constantly reading the cutting resistance from the blade.

SWARF CONVEYOR

The raker type swarf conveyor endlessly rakes chips out while allowing cutting fluid to drain back into the reservoir.

SAW FRAME LINEAR GUIDES

The saw frame travels up and down on linear guides reducing friction and making for a more smooth and accurate blade feeding.

CNC CONTROL

Anybody can operate our user friendly CNC controlled machines. The intelligent CNC takes all the worries and hard work out of programming.

SAW AUTO SHIFT

The band saw machine automatically shifts down and slightly away from the feeding workpiece to avoid any possible collision or damage to the structure of the saw.

PHOTO GALLERY

DAITO DISII PROGRAMING SOFTWARE
NO MANUAL INPUT

GRAPHICAL PROGRAMMING INTERFACE

AUTOMATIC NESTING and OPTIMISING

TOP