DAITO CUD3C CNC DRILL

Carbide Ultimate Drill For Structural Steel Drilling

JAPANS #1 CNC DRILL

Japanese Technology.
Japanese Quality.

* 3 x Independent drilling spindles
* Automatic tool changing
* 4 side high-speed layout marking
* Multiple flange and web supports
* Fully CNC controlled

INDEPENDENT DRILL HEADS
PLUS SUB-AXIS

Each of the three (3) high-speed drilling spindles (Top / Left / Right) can independently move in all directions along the workpiece.

This ensures the hole pitch and accuracy are always precise.

Plus drill head has its own Automatic Tool Changer (ATC).

NEW LAYOUT MARKING
ULTRA-FAST

In addition to high-performance carbide drilling, the CUD3C1050 performs clean, fast and precise weld layout markings as illustrated below.
‘PRE-WELDING’

Together with the optional under-web marking unit, it’s possible to mark welding lines and letters on all 4 sides of the workpiece.

This automation saves time and money all the while dramatically reducing human errors.

DRILL FEATURES

3 DRILL SPINDLES

CUD3C is equipped with 3 spindles. Each spindle is capable of high-speed carbide drilling, milling, tapping, countersinking and new high-speed layout marking.

INDEPENDENT TRAVELING DRILLS

Each of the 3 drill heads travel independently in all directions allowing all holes within range to be drilled without continually re-indexing and re-clamping the workpiece. This means much higher accuracy and higher productivity.

4 SIDE LAYOUT MARKING

New high-speed layout marking is 8 to 10 times faster than traditional scribe marking. The workpiece is stationary for maximum reliability and accuracy.

AUTOMATIC TOOL CHANGING

Three (3) Independent tool changers for each of the drill heads. This allows for a variety of uninterrupted drilling / marking operations with different tools.

PINCH ROLLER SYSTEM

The workpiece is fed by powerful pinch rollers located on the in-feed / out-feed sides of the machine. Even the heaviest workpiece is fed efficiently and accurately.

DUAL MEASURING DISKS

For precise measurements, twin disks work together. If the measurements of each disk vary, an alarm will be issued to stop the machine.

FLANGE HEIGHT GAUGES & SUPPORTS

The Flange height gauges not only support flanges, but also measure flange distortion that might remain after being vertically clamped.

WEB SUPPORTS

Web supports prevent thinner webs from bending under the pressure of drilling. This feature reduces drill bit failure and improves hole quality.

POSITIONING COMPENSATION

The workpiece positioning error caused by inertia is compensated by the positioning of each drill.

4 VERTICAL CLAMP ROLLERS

During the material feed, four vertical rollers clamp evenly to assist distorted material is firmly held down. Angles and flat bars are also able to be clamped as well as H beams.

PENDANT OPERATION PANEL

The pendant mounted operation panel can be easily swung to either side of the machine for easy setup and operation.

CNC CONTROL

Anybody can operate our user friendly CNC controlled machines. The intelligent CNC takes all the worries and hard work out of programming.

DRILL OPTIONS

CHIP SWEEPER

After drilling, the chip sweeper cleans out built-up drill chips from the beam. Making sure no damage to the saw blade edge. Also ensures a clean and safe work environment with no chips spread throughout the workshop.

CHIP CONVEYOR

Drill chips built up inside the machine are automatically removed by the chip conveyor.

LASER MARKER

Irregular or manual positioning of the workpiece is made easy using the laser beam.

UNDER-WEB MARKING

For the welding layout marking, either scratching or scribing is available. (Sample photo is scratching)

WEB HEIGHT GAUGES

Two web height gauges check actual web height to allow automatic compensation for possible irregularities. (Optional)

MATERIAL LOADING & UNLOADING

Daito lift and carry cart system for loading and unloading to material stockyards. Gain increased productivity without having to rely on overhead cranes or forklifts.

PLAYS WELL WITH OTHERS

Multiple drilling, sawing, and coping line configurations
to suit your budget, factory size, material flow, or your required output.

TANDEM DRILL & SAW LINE

Drill and Saw working in perfect harmony.

LINE SYSTEM EXPLANATION

1. MATERIAL LOADING

Loading by lift and carry carts. No weight restrictions, no noise and no maintenance.

2. CNC DRILLING MACHINE

Daito's famous CNC drilling machines with 3 spindles and independent travel.

3. BAND SAW

Fully digital high-speed band saw machines with mitre cutting and automation.

4. AUTOMATIC SMALL PARTS HANDLING

Daito has mastered the difficult task of handling and removing small parts, trim cuts and remnants from the line.

5. MATERIAL UNLOADING

Easily remove processed parts from the line by discharge or lift and carry.

PHOTO GALLERY

WANT TO SEE MORE LINE SYSTEM LAYOUTS.

All Daito line systems are fully customisable to suit the customer. Click here to view the many possible layouts.

DAITO DISII PROGRAMING SOFTWARE
NO MANUAL INPUT

GRAPHICAL PROGRAMMING INTERFACE

AUTOMATIC NESTING and OPTIMISING

TOP